1. Manual
	1) Cut the upper part of a cabbage head.
	2) Regulate the thickness with the thickness adjuster.
	3) Put the axis of the cabbage presser into the cabbage up to the 	   	
	    root.
	4) Make sure that the plug is into the outlet.
	5) Lower the lever to fix the cabbage, turn it on.
	6) Put down lever and fix a cabbage, then turn on switch. 
	7) After using, take the plug off the outlet.
	8) Put smaller cabbage than the container into it.
	9) If the cabbage runs idle , push the lever.
	10) Depending on the cabbage condition, it is possible that it can be cut in 	
	    big size.Even so, when the machine cuts near the central part of the cabbage, it makes 
             small size.

2. Way to change blades.
	1) Turn the switch off , take the plug off the outlet.
	2) Unscrew 2 screws on the upper part of the blade then the holder will be 
	   disassembled. 
	3) Unscrew the remained screw and the blade will be disassembled.

* When you put it together, assemble and fit according to size of the inner side 
because the blade is short in the blade holder.
* Change blades about every 100 cabbages. 

3. Caution
	1) Except experts , do not disassemble or repair the machine.
	2) Do not pour water inside or under side.
	3) Do not let children touch it nor put it where they can reach it.
	4) Do not touch the tip of the blade for it is very sharp.
	5) While using it, do not put your finger inside.
	6) When you pull the plug , you need to hold the plug off the 	outlet.
	7) After making sure the switch is off , and pull the plug off.
	8) When cleaning , take the blades off.
	9) Make sure that the plug is all right and that it is put into the outlet 	
	   closely.
	10) Do not injure the cord and the plug nor pull them hard.
	11) Use only 220V outlet.
	12) Put it on the stable place.
	13) Do not use any other pushing box except its own.
	14) While it spinning , do not put a cabbage or the pushing box  into it.
	15) While using it, do not carry it.
	16) When not using it, pull the plug off.
	17) While assembling , breaking it down  and repairing , turn it 	    	
	     off  and pull the plug off.