1. Manual
	1) Put the vegetables on the opening.
	2) Put the plug into the outlet.
	3) Turn it on
	4) Push the vegetables into the opening with the pushing stick.
	5) The vegetables go through the transport screw which cut them and come 
	   out, so put the container under the outlet.
	6) After operating turn the power switch off.
	7) For next using unfasten the fixing nut and disassemble the blades and 	
	   the transport screws, wash up the inside.
	8) In case of not operating with the switch on, change the fuse attached to 	 
	   the lower part of the base.
2. Caution
	1) Make sure the switch is off before putting the plug into the outlet.
	2) When disassembling or assembling, after using, turn the switch off and 	
	   pull the plug off the outlet.
	3) Store it in the place without water and dampness and heat.
	4) Do not wash the main part with water ( otherwise it can cause 	   	
	   breakdown on the motor and the switch )
	5) Put the machine on the even place.
	6) Before using it make sure that the bolts are fastened. 
	7) Do not put a finger, a spoon and  a chopstick while it spinning.
	8) In case of overflow and stopping, turn it off, pull the plug off and clean 	
	   the cutter and the screw up.