1. Starting manual
	1) Make sure the opening closed and there is no oil lick.
	2) Make sure electricity goes through the switch box and there is no line
	   cutted.
	3) Make sure that the voltage of the burner and outlet is same and check 
          the line.
	4) Before turning it on make sure all the switches are off.
	5) Turn the power switch on and after 30 minutes let the automatic switch 
          be in the automatic position.
	6) In case it doesn't work, remove the air in the pump, push the button.

2. Turning off
	1) Keep the power switch on and turn the automatic switch off. let the
          motor run idle which makes remaining heat in the combustion room
          cooler. ( otherwise it cause a break down on the burner )
	2) If the combustion is completely cool, turn it off.